# Apply for a transaction certificate A transaction certificate (TC) records the sale of certified biomass to a buyer. You, the seller, apply for it. Your Certification Body (CB) checks the application and approves it. The quantity you sell is taken from your available stock. Before you start, make sure that: - you have an active [scope certificate](scope-certificates.md) for the module you sell under; - the buyer is [linked to your account](buyers.md); - you have [available stock](available-stock.md) to sell. ## Start the application 1. Go to **Certificates › Transaction › New application**, or select **New TC Application** on the dashboard. 2. Select the module you sell under. The list shows your scope certificates with their module, GGL categories, validity period and CB. Check the module carefully before you proceed. ```{figure} images/tc-select-module.png :alt: The list of modules and scope certificates, with the FIT/FIP module selected. Selecting the module for a transaction certificate. ``` 3. Select **Save & Proceed**. The application is created as a draft and guides you through seven steps. The bar at the top shows where you are. Your entries are saved each time you select **Proceed**, so you can stop at any moment and [continue later](follow-your-transaction-certificates.md#continue-a-draft). ## Step 1: Buyer info The seller (your company) and the Certification Body are filled in for you. 1. At **Buyer**, choose to search by **Name** or by **USI** and start typing. Select the buyer from the list that appears. 2. At **Dispatch city**, start typing the name of the city the biomass is sent from and select the city from the list. The city of your company is filled in for you. 3. At **Destination city**, do the same for the city the biomass is sent to. 4. Select **Proceed**. ```{figure} images/tc-buyer-info.png :alt: Step 1 of the application, with the seller, the Certification Body, the selected buyer and the dispatch and destination cities. Step 1, *Buyer info*. ``` ```{note} Type the full name of a city and choose it from the list. If the city does not appear, check the spelling. ``` ## Step 2: Product info 1. Enter the **Shipment / file number**. 2. Enter the **Product Name**. Choose from the list or type a name. 3. Under the SDE++ module only: choose the **NTA code** that describes the product. 4. Select **Include Suppliers of Raw Material in PDF** if the suppliers of raw material have to be printed on the certificate. 5. Under **Drain from available stock below**, select the stock you sell. For each selected line, enter the quantity in **Consumed (MT)**. The table shows, for each line of available stock, where it comes from, the identifier, product, modules, GGL category of biomass, FIT/FIP classification, GGL claim, total GHG emissions and the available quantity. Only stock certified for the module of the application is listed. 6. Select **Proceed**. ```{figure} images/tc-product-info.png :alt: Step 2 of the application, with the shipment number, product name and 300 MT selected from the available stock. Step 2, *Product info*. ``` ### Stock with category AR or WB Stock registered before the current version of the platform can have the category of biomass *AR* (agricultural residues) or *WB* (woody biomass). These categories have been replaced: AR and WB are now *FIT/FIP classifications*, and the categories of biomass are Cat 1 to Cat 5. A line of available stock with category AR or WB has no checkbox in the **Select** column. Before you can sell from it, you have to assign its FIT/FIP classification. You can also assign a new category of biomass, but that is optional. 1. In the **FIT/FIP classification** column of the line, select **Select**. 2. Choose the classification: *Agricultural Residues* or *Woody Biomass*. The classification that matches the old category is already selected. Optionally choose a sub-classification, such as *Eligible fuels* or *Processing residues*. 3. Select **Update**. ```{figure} images/tc-fitfip-classification.png :alt: The FIT/FIP classification menu of a line of AR stock, with Agricultural Residues and Eligible fuels selected. Assigning the FIT/FIP classification to a line of AR stock. ``` The classification is shown in the line, and the line now has a checkbox. ```{figure} images/tc-fitfip-assigned.png :alt: The line of AR stock with the FIT/FIP classification AR - Eligible fuels and a checkbox in the Select column. The line after the classification is assigned. ``` 4. Optionally, assign a category of biomass: select the pencil icon next to *AR* or *WB* in the **GGL category of biomass** column, select one or more of Cat 1 to Cat 5, and select **Update**. ```{figure} images/tc-category-assign.png :alt: The category menu of the line with Cat 4 - Agricultural biomass selected. Assigning Cat 4 to a line of AR stock. ``` The new category replaces AR or WB in the line. ```{figure} images/tc-category-assigned.png :alt: The line of stock with category Cat 4 and FIT/FIP classification AR - Eligible fuels. The line after the category is assigned. ``` 5. Select the line and enter the quantity, as for any other line. The classification and category you assign apply to the quantity you sell in this application only. They are printed on the transaction certificate and passed on to the buyer. The rest of the line stays in your available stock with its old category, so you assign them again the next time you sell from it. You can change your choice with **Select** or the pencil icon as long as the application is a draft. In [step 3](#step-3-review-scope), the outgoing shipment shows the previous and the current category of biomass, so you can check the conversion before you submit. ```{figure} images/tc-review-scope-converted.png :alt: Step 3 of an application for AR stock, showing previous category AR, current category Cat 4 and FIT/FIP classification AR-Eligible fuels. Step 3, *Review scope*, for converted AR stock. ``` ## Step 3: Review scope This step compares your certified scope with the buyer's: - on the left, your active scope certificates for the module and the stock you sell; - on the right, the buyer's active scope certificates and what the buyer will receive. Check the comparison and select **Proceed**. ```{figure} images/tc-review-scope.png :alt: Step 3 of the application, comparing the seller's scope and outgoing shipment with the buyer's scope and incoming shipment. Step 3, *Review scope*. ``` ```{important} The buyer must be certified for the module of the application. If not, the step shows *Buyer certification mismatch* and the message *Cannot proceed*, and you cannot continue. Go back to step 1 and choose another buyer, or ask the buyer to get certified for the module first. ``` ## Step 4: GHG emissions The greenhouse gas emissions of the stock you sell are filled in. You can add emissions for processing and for transport that occurred while the biomass was with you, in the fields next to the **+** sign. You can also enter savings from carbon capture and storage and from carbon capture replacement. The total is calculated for you. ```{figure} images/tc-ghg.png :alt: Step 4 of the application with the GHG emissions of the stock and 1.2 gCO2eq/MJ of transport emissions added. Step 4, *GHG emissions*. ``` If the buyer has to add the emissions under its own responsibility, select **Does the buyer need to include GHG emissions under their responsibility for this transaction?** and confirm. You can then only submit the application to the Certification Body after the buyer has provided the emissions. Select **Proceed**. ## Step 5: Transport info 1. Enter the **Date of loading**, the **Place of loading** and the **Place of discharge**. 2. Under **Modes of transport**, choose the mode (*Air*, *Water* or *Road*) and enter the transport number, for example the IMO number of a vessel or the registration of a truck. Select **+** to add another mode, and **-** to remove one. 3. Enter any **Additional info**. It is printed on the certificate as an additional declaration. 4. Select **Proceed**. If transport details do not apply, select **Not applicable**. ```{figure} images/tc-transport.png :alt: Step 5 of the application with loading date, places of loading and discharge, two modes of transport and additional information. Step 5, *Transport info*. ``` ## Step 6: Supporting documents An invoice and a transport document are required. 1. Choose the **Document type** (*Invoice document*, *Transport document*, *Supporting document for GHG emission* or *Other documents*) and the file, and select **Upload**. 2. Repeat this for each document. Select the bin icon to remove a document. 3. Select **Proceed**. Documents can be at most 10 MB each. The allowed formats are .pdf, .xlsx, .docx, .png, .jpeg and .jpg. ```{figure} images/tc-documents.png :alt: Step 6 of the application with an invoice and a transport document uploaded. Step 6, *Supporting documents*. ``` ## Step 7: Confirmation 1. Read the terms and conditions. 2. Select **Preview** to see the transaction certificate as it will be issued. From the preview you can also download it or share it. 3. Select **Confirm and submit**. 4. Select **I accept the terms and condition** and select **Submit**. ```{figure} images/tc-submit-confirm.png :alt: The confirmation dialog with the I accept the terms and condition checkbox and the Submit button. Submitting the application. ``` The platform shows *Your TC request is sent to your CB for approval*, and the application has the status *Applied*. The quantity is reserved: it is taken from your available stock straight away. To follow the application, see [](follow-your-transaction-certificates.md). ## Delete the application While the application is a draft, you can delete it: select **Delete** in the top right corner of the application and confirm.